What Sizes Do Circular Saws Come In?

Circular saw sizes are usually classified by the diameter of their blades. Sizes of 5-1/2 to 7-1/4 inches are the most common. There are also many options available on circular saws. Choose the best circular saw for your specific needs.

What size circular saw will cut a 4×4?

The best way to cut a 4×4 post is by using a 12-inch miter saw, 10-inch radial arm saw, both of which can cut completely through a post in one pass, or a standard circular saw that can make precise cuts in two passes with the help of a simple jig.

What are the 2 types of circular saws?

A1: There are two basic types of circular saws: the worm drive saw, which can be identified by its rear-mounted motor, and the sidewinder, so named because its motor is positioned alongside the blade.

Can a 4.5 inch circular saw cut a 2×4?

The new WORXSAW Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in.

How deep does a six and a half inch circular saw cut?

At a 45 degree angle this saw can cut 1-7/8″ deep which is needed when cutting things like rafters that require cutting though conventional 1-1/2″ thick framing lumber.

See also  9 Best Number Of Teeth For Circular Saw

Can you use different size blades on a circular saw?

Short answer: Within reason, you can. Long answer: For safety reasons the blade gap should not be larger than 1/8″ (3 mm). If you do not care about workplace safety, you can use smaller circular saw blades in most cases.

What is Arbor size on a circular saw?

The size of an arbor hole on a circular saw blade will vary depending on the blade’s outside diameter. As the scale increases or decreases, the arbor hole generally follows suit. For standard 8″ and 10″ blades, arbor hole diameters typically sit at 5/8″.

error: Content is protected !!