How To Keep Circular Saw Guard Up?

How does the blade guard work on a circular saw?

Blade guard: A retractable guard covers the circular saw blade when it isn’t operating. When the saw is lined up and ready to cut, the guard is lifted using a tab on its side. Shoe: Sometimes called the base of the saw, this is the metal rectangle that rests on top of the material being cut.

What is the appropriate guard device for a circular saw?

Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose the portion of the saw above the table and that portion of the saw above the material being cut.

Why does my circular saw keep stopping?

Circular saws keep stopping due to a dull or damaged blade usually. However, problems like insufficient battery, or a damaged power cord can also cause a circular saw to keep stopping.

What is the negative side of using carbide tipped blades?

Carbide saw blades are optimal tools, but they are not cheap. Carbide is an extremely hard material, and it cuts through softer material with ease. But the downside to carbide is that it is very brittle and easy to damage.

See also  9 Best Circular Saw With Blade On Left Side

Should you wear gloves when using a circular saw?

When using a circular saw, the absolute minimum in terms of protective equipment you should always use is a pair of tough work gloves and proper eye protection. … Gloves won’t give you much protection if your hand comes into contact with the spinning blade, but they will protect your hands from splinters.

What precaution should be taken while working on circular saw machine?

Wear safety glasses or goggles, or a face shield (with safety glasses or goggles). Wear an approved respirator or dust mask when exposed to harmful or nuisance dusts. Use appropriate hearing protection equipment in noisy areas. Check the retracting lower blade guard to make certain it works freely.

What size blade does a Porter Cable circular saw use?

The PORTER-CABLE PCC661B 20V Max Lithium Bare 5-1/2″ Circular Saw features a high-performance motor delivers 3000 RPM’s for aggressive cutting. It has a 5-1/2″ carbide tooth blade which delivers a 2-1/8′ cutting capacity for a variety of cutting applications.

error: Content is protected !!