How Big Circular Saw Do I Need?

How do I know what size circular saw to get?

Circular saws are categorized by the diameter of the blade they take. The most common and useful size for DIYers is 7 and 1/4 inches. Saws this size will cut through material more than 3-inches thick, and they also offer the widest variety of blade choices for cutting substances other than wood.

Can a 7 1 4 circular saw cut a 4×4?

What is this? Like miter saws that measure less than 12 inches, a circular saw’s 6.5-inch or 7.25-inch blade will not cut cleanly through a 4×4. The maximum depth of most circular saws is just 2.5 inches. This means you’ll need to make two cuts.

Can a 6 1 2 inch circular saw cut a 2×4?

The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.

Can a 4.5 inch circular saw cut a 2×4?

The new WORXSAW Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in.

Whats the difference between a 6.5 and 7.25 circular saw?

The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t.

See also  10 Best Circular Saw Blade For Softwood

How thick can a 5 1/2 inch circular saw cut?

The blade, located on the left side, cuts up to 1-3/4-inch at 90 degrees and 1-3/16-inch at 45 degrees.

Can a 7 1 4 circular saw cut a 2×4?

When power availability was a minor consideration, the standard portable circular saw blade was 7-1/4 inches in diameter. Why? Because it would easily cut through 2×4’s at 90 degrees, but it would also easily cut through a 2×4 at a 45 degrees bevel.

error: Content is protected !!