8 Best Circular Saw For Hardie Board

GALAX PRO Circular Saw Corded10A 5800 RPM Hand-Held Saw, with 7-1/4 Inch Blade, Adjustable Cutting Depth (1-5/8″ to 2-1/2″) for Wood and Logs Cutting

Check Price on Amazon

Norske Tools NCSBP281 6-1/2 inch 4 Tooth Polycrystalline Diamond (PCD) Hardie Fiber Cement Saw Blade

Check Price on Amazon

IRWIN Tools Polycrystalline Diamond-Tipped Fiber Cement Circular Saw Blade, 7 1/4-inch, 4-Tooth (4935473)

Check Price on Amazon

CS Unitec EDS 125 5″ Circular Diamond Hand Saw for Wet/Dry Cutting of Ceramic Tile, Stone, Hardie Board

Check Price on Amazon

WEN BL0704 7-1/4-Inch 4-Tooth Diamond-Tipped (PCD) Professional Circular Saw Blade for Fiber Cement and Laminate Flooring

Check Price on Amazon

Irwin Tools 15702ZR 7-1/4″ 6T Fiber Cement Irwin Classic

Check Price on Amazon

Freud D0704DH Diablo 7-1/4″x4T PCD Tip TCG Hardie Fiber Cement Saw Bld,5/8 Arbor

Check Price on Amazon

Freud-Diablo 6-1/2 X 4 PCD Fiber Cement DIAB, Multi, One Size (D0604DH)

Check Price on Amazon

Can you cut Hardie board with a circular saw?

It is possible to use a jigsaw, table saw or circular saw if it has the right blade. Cut the board the same way you would any other material once you’re prepared. Make the cut by aligning the board against the guard and slowly but surely.

What is the best tool to cut Hardie board with?

You can use a utility knife or shears, but only if you want to score. Dust can be created by using a high-speed grinder to cut cement board indoors.

What kind of circular saw blade Do I need to cut Hardie board?

If you want to install Hardie siding on a shed or other small building, you can use a fiber cement saw blade with a polycrystalline diamond tip. The blade will burn out much quicker for installations with more than one cut.

Does it matter which side of Hardie board faces out?

Which side does it go up on? We recommend that the smooth side with the nail pattern on the center goes up.

What is a carbide blade?

Steel is used in the main body of the blade. The body is covered with the small tips of carbide. A tool steel tip can hold an edge up to 20 times longer. There is a typical circular saw. It gets dull eventually with the bicyle tips.

Can you cut Hardie board with a wood blade?

There are a number of power tools you can use. If you want to make straight cuts, use a circular saw with a wood-cutting blade and push it into the material. It’s important to use a blade with the least number of teeth.

What blade do you use to cut fiber cement board?

The best way to cut fiber-cement siding is with a 4- to 6- tooth PCD blade. If you attempt a gang cut, the blades can warp, and regular blades will cut fiber cement more quickly.

What is a Hardie blade?

There is a summary. James Hardie Building Products recommends the only approved PCD tipped fiber cement blade to be called the Diablo HardieBlade. The longest life in all fiber cement materials can be achieved with the help of the Diablo Fiber Cement Blades.

Can you use a nail gun on hardiplank?

The siding and roofing nailers are the best for attaching hardie siding. If you must use a framing nailer, be sure to fit it with a quality flush mount attachment so that the depth of the fastening is controlled.

Can you cut Hardie board with a jigsaw?

If you need to cut a circular piece or an irregular shape from the cement board, you should use a jigsaw. The jigsaw should be fitted with a metal cutting blade.

How do you cut a hole in fiber cement siding?

Cement fiber siding is very similar to wood. Since it’s more abrasive than wood, it’s best to use a diamond blade. The holes can be made using an electric drill and a drill bit. Good eye protection is something that should be done.

How do you drill a hole in Hardie board?

It is possible to cut and drill it. The carbide drill bit is better for drilling through cement-fiber siding than a steel drill bit. Installation of cement-fiber siding can be done while the house is still being built.

Do you have to tape Hardie board?

The seams between the tile backer boards need to be treated with 2-inch alkali- resistant mesh tape.

How do you fasten Hardie board?

The siding can be fastened with pneumatic nailer or hand. You can use screws that are resistant to corrosive elements, or you can use nails that are hot dipped. If you want to nail the siding, you can either face nailed it at the bottom or blind nailed it at the top.

Do you need Thinset under Hardie board?

I don’t think it’s a good idea to put thinset under the hardie board since it has small gaps. It will cause a huge mess under the house or under the bathroom. Since it is hard to level thinset that is separated by gaps, it is more likely that the floor will be even.

Are most circular saw blades are carbide tipped?

A thin-rim fine-tooth circular saw blade can be used to cut thick pieces of wood. The blades of the circular-saw are made from the same type of material.

Are carbide blades better?

Compared to the basic carbon steel blade, the Carbide-tipped blades are more heat and impact resistant and can last up to 200 times longer.

Does Hardie board need caulking?

It is not recommended to use caulk or H-jointers for the butt joints of the siding. The horizontal overlap between siding plank is not recommended by James Hardie.

Can you use screws for HardiePlank siding?

According to the Wind Load Tables, HardiePlank® lap siding may be used with fastenings approved by the International Code Council. It is necessary that the bolts be resistant to the corrosive elements. There will be bolts between 1 in. and 1/2 in.

Can you install hardiplank directly to studs?

It is possible to install lap siding over braced wood or steel studs that are at least 7/16″ thick.

See also  Will A 6 1/2 Circular Saw Cut A 2X4?
error: Content is protected !!